BOC Edwards makes its move to Czech mate
Continuing with the long term relationship Bubble Automation has with BOC Edwards, we were entrusted with a fairly complicated project, which required three of the existing EM family type pump test panels to be upgraded for the planned relocation to the Czech Republic.
These new test panels were to allow both RV and EM type pumps to be simultaneously tested on the same panel.
The PLC and SCADA software required extensive modifications.
These included Streamlining the data between the SCADA and the PLC as well as
single
piece flow, which allowed pumps to be placed on test at any time.
The new system would give BOC Edwards far greater flexibility when scheduling pump build and test. One of the key requirements of the project was to keep disruption of the pump production facility to an absolute minimum.
This involved taking one panel off production, carrying out the upgrade work and then installing the new software, when the new PLC and SCADA were fully commissioned the other panels were then taken offline.
All the required upgrade work was carried out and completed within the specified timeframe. Before shipment the panels were put through a thorough test regime over an agreed proving period.
Related Topics
Industrial Control System PLC Programmer UK
Industrial Control System PLC Programmers
Buy
Wonderware developers
Wonderware programmers
Wonderware developer
Wonderware programmer
Industrial Control Systems PLC Programmers
Siemens HMI Programmers, Allen Bradley HMI Programmers, Allen Bradley PanelBuilder32 programmers,
Telemecanique software engineers, Siemens support
engineers, Allen Bradley integrators, Siemens
WINCC experts, process control support engineers, factory
automation analysts, control system software
specialists, Siemens S7200 developers, process control
consultants, Siemens WINCC providers, free
quote for Siemens S5 project, Southampton Hampshire
England United Kingdom UK
Marine siemens plc programmers, Marina HMI Engineers, Yacht control systems, Super yacht programming systems, Motor boat Allen Bradley software Engineers Ocean Village, Southampton, Port Solent, Portsmouth, Bournemouth, Poole, Gosport, Fareham, Swanick, Hythe, Totton, Shamrock quay, Chichester, Gosport. Boatyard automation engineers, HMI and SCADA developers for boatyards and moorings.
Wonderware Intouch programmers, Allen Bradley PanelBuilder32 software engineers, Telemecanique
support engineers, Siemens integrators, Allen Bradley experts, Siemens WINCC engineers, process
control analysts, Siemens HMI Programmer, Allen Bradley HMI Programmer, factory automation specialists,
control system developers, Siemens WINCC consultants,
Allen Bradley providers, free quote for Siemens
S7 project, Southampton Hampshire England United
Kingdom UK. We work all over the UK and Europe but
are local to Hedge End, Southampton, Portsmouth, Winchester, Eastleigh, Romsey, Fareham, Havant,
Alton. Petersfield, Worthing, Basingstoke, Ringwood, Salisbury, Bournemouth, Andover, Chichester,
Guilford, Farnham, Bognor Regis Shoreham by Sea.
Industrial Control System PLC Programmer
Siemens HMI Programmer
Southern England, South, South East, South West, Hampshire, Wiltshire, Surrey, West Sussex, Berkshire, Dorset, Oxfordshire.